Bikes

Loading Bikes

• Prepare your bike for loading by removing loose items.
• Load your bike from the curb or in front of the bus. Do not step into oncoming traffic.
• Squeeze handle up to release latch, then fold down the bike rack. Use one hand to unlatch and pull the bike rack down, holding your bike with your other hand. Do not lean your bike against the bus.

• Lift your bike onto the bike rack, fitting the wheels into labeled wheel slots. Use the slot closest to the bus first.
• Raise the support arm up and over the front tire so the hook rests at the highest point on the front wheel.

Unloading Bikes

• Inform the bus driver that you will be unloading your bike as you approach your stop. Unload your bike from in front of the bus or from the curb.
• Raise the support arm off the tire. The support arm automatically folds down to a secure position.
• Lift your bike out of the bike rack.
• Squeeze the handle and fold up the bike rack. The bike rack locks in place with a snap.
• Step to the curb away from the bus with your bike, and allow the bus to proceed onward.